To be able to demonstrate the Spring Pole Lathe tools will be needed. In particular the following would be basic: (2) Faceplates 3 or 4 inch diameter internal threaded 3/4-16TPI. Turning tools about 16 inches long: (1) 1/2 inch skew chisel, 1 inch same, 3/8 inch Spindle gouge, 5/8 inch same. (1) 1/2 inch Spear point, (1) 1/2 inch Round Nose Scraper, (1) 1/4 inch Parting Tool, and (1) 3/8 inch Hollowing Tool.

To ensure a better 18th Century presentation, these tools can all be used (not new) and do not have to match. It would be preferable that not be shiny chrome for the 18th Century theme. The tools will be stored on a special chest to go with the lathe along with other necessary tools and accessories. The supply of the tools will be a way for members to participate in the Lathe project.

Please bring the tools to the 2011 Annual Meeting now being held at Ft. Roberdeau in Altoona, Pennsylvania.

Regards,
Dick Toone
Project Leader